Your Position: Home > Products > USB 3.1 / USB-C >

Ableconn IU31-MSAT 2.5" USB 3.1 Gen 2 (10 Gbps) to Dual mSATA SSD Adapter with Hardward RAID - USB SSD

Ableconn IU31-MSAT 2.5" USB 3.1 Gen 2 (10 Gbps) to Dual mSATA SSD Adapter with Hardward RAID - USB SSD

  • Product Specification:

    • Dimensions 4 x 2.8 x 0.2 inches / 100 x 70 x 7 mm
    • Weight 1.3 ounces / 36 g
    • Capacity 10 Gbps, USB 3.1 Gen 2
    • Chipset ASMedia ASM1352R
    • Certification CE, FCC, RoHS
  • Buy at Amazon

Product Description

Feature Bullets

  • Convert 2x Full Size mSATA SSD to an USB3.1 Gen2 (10Gbps) 7mm height 2.5" drive. With USB 3.1 Gen 2 10Gbps bandwidth, it's able to achieve 825 MB/s pwerformance when configures two mSATA SSD at H/W RAID 0 mode.
  • Can be installed as an internal 2.5" drive with 8x mounting holes and 4x mounting screws. The USB 3.0/3.1 Micro-B female upstream connector is for connecting to computer USB host.
  • No driver installation required. Native support in Windows, Mac and Linux.
  • Supports SATA III (6 Gbps)and SATA II (3 Gbps) mSATA SSD. Supports USB3.1, USB3.0 and USB2.0 main board.
  • CE, FCC, and Fully RoHS compliant. High quality product. Made in Taiwan.


Product Description

The Ableconn IU31-MSAT turns two mSATA SSD modules into an USB 3.1 2.5" SSD drive. The drive metal frame and mounting holes enable you to install it like a 2.5" internal hard drive. With USB 3.1 Gen 2 10Gbps bandwidth, it's able to achieve 825 MB/s pwerformance when configures two mSATA SSD at H/W RAID 0 mode.

Specification

  • Connector:
    • 1 x USB 3.1 Micro-B female
    • 1 x 3.5mm DC power plug jeck (optional external 5V/3A input power)
    • 2 x mSATA 6 Gb/s slot (full size)
  • Chipset: ASMedia ASM1352R
  • Data transfer rate:
    • USB 3.1 up to 10 Gbps
  • Jumper Selection:
    • 1 x jumper for RAID Mode setting
       
  • Convert 2x Full Size mSATA SSD to an USB3.1 7mm height 2.5" drive
  • Supports H/W RAID 0 Mode
  • Supports SATA III (6 Gbps)and SATA II (3 Gbps) mSATA SSD
  • Supports ATA/ATAPI Packet command set and LBA 48 addressing mode
  • Compliant with Serial ATA Specification Revision 2.6
  • Compliant with USB 3.1 Rev. 1.0, USB 2.0, OHCI 1.0a, and EHCI 0.95
  • Supports SuperSpeed+ (10 Gbps), SuperSpeed (5 Gbps), HighSpeed (480 Mbps), FullSpeed (12 Mbps), and LowSpeed (1.5 Mbps) transaction
  • Latch type mSATA connector on board. It doesn't need screws to retain mSATA SSD
  • PCBA and 2x mSATA SSD can be powered by USB bus in most applications. The optional DC jack power input accepts external 5V/3A power when using power hungry mSATA SSD.
  • LED indicators for mSATA accessing activity or device failure
  • Dimensions (LxWxH): 4 x 2.8 x 0.2 in / 100 x 70 x 7 mm
  • No device driver installation is required.
  • CE, FCC, and Fully RoHS compliant.
  • Made in Taiwan


System Requirements

  • One free USB port
  • USB connection cable with USB 3.0/3.1 Micro-B male plug


Package Contents

  • Ableconn IU31-MSAT 2.5" USB 3.1 Gen 2 to Dual mSATA SSD Adapter
  • 4x Mounting screws


Warranty

  • Limited One-Year Warranty and Lifetime Product Support

Customer FAQ

Feel free to ask questions about this product here..
Ableconn Customer Support Team will do their best to quickly answer your questions. 

Title:*

Email:*

Comment:

Please enter the verification code - humans only!*

Back To Top